Table of Contents
Advertisement
3
.
P
a
n
e
l
E
3
.
P
a
n
e
l
E
LED
ACT
(Activity)
USB1~USB2
SFP
WAN1~WAN2
QoS
WLAN
CSM
VPN
LED on Connector
WAN1
or
Fiber WAN
WAN2
LAN1~LAN4
x
p
l
a
n
a
t
i
o
n
x
p
l
a
n
a
t
i
o
n
Status
Explanation
Blinking
The router is powered on and running normally.
Off
The router is powered off.
On
A USB device is connected and active.
Blinking
The data is transmitting.
On
No fiber line connected.
Off
File line connected.
On
The WAN connection is ready.
Blinking
It will blink while transmitting data.
On
The QoS function is active.
On
Wireless access point is ready.
Blinking
Ethernet packets are transmitting over wireless LAN.
Off
The WLAN function is inactive.
On
The profile of CSM (Content Security Management) for
IM/P2P application is enabled from Firewall >> General
Setup. (Such profile is established under CSM menu).
On
VPN tunnel is up and down.
Off
VPN services are disabled.
Blinking
Traffic is passing through VPN tunnel.
Left LED
On
(Green)
Off
Blinking
Right LED
On
(Green)
Off
Left LED
On
(Green)
Off
Blinking
Right LED
On
(Green)
Off
Left LED
On
(Green)
Off
The port is connected.
The port is disconnected.
The data is transmitting through WAN1 or
Fiber WAN.
The WAN1/Fiber port is connected with
1000Mbps.
The WAN1/Fiber port is connected with
10/100Mbps.
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps.
The port is connected.
The port is disconnected.
3
Advertisement
Table of Contents
