Sony super motion hdc4300 Operation Manual page 39

OPERATION
Page name Item
Page No.
<'!' IND> ND
02 (U05)
CC
WHITE
5600K
GAIN
SHUTTER
FAN
EXT
Y TALLY
<VF MARKER> MARKER
03 (U06)
LEVEL
CENTER
SAFETY ZONE
EFFECT
ASPECT
MASK
SAFETY
Settings
ON, OFF
1, 2, 3, 4, 5 (combination allowed)
ON, OFF
A, B, C, D (combination allowed)
ON, OFF, ---
P, A, B (combination allowed)
ON, OFF, ---
ON, OFF
ON, OFF, ---
L, M, H (combination allowed)
ON, OFF, ---
ON, OFF
ON, OFF
AUTO1, AUTO2, MIN, MAX
ON, OFF
ON, OFF
ON, OFF
WHITE, BLACK, DOT
0 to 100%, 40%
ON, OFF
1, 2, 3, 4
ON, OFF
80.0, 90.0, 92.5, 95.0%
ON, OFF, OFF(ASSIST IND),
OFF(AF DISP)
ON, OFF
16:9, 15:9, 14:9, 13:9, 4:3, (4.3)
ON, OFF, (ON)
0 to 15, 12
ON, OFF, OFF(AREA)
80.0, 90.0, 92.5, 95.0%
39
Description
[IND]: Turns the '!' display area (page 26) on/off.
[NORMAL]: Specifies the conditions under which the '!'
indication is not to be displayed even if [IND] is ON.
(By specifying the standard or normal conditions
here, non-standard or abnormal conditions can be
found with the '!' indication on the viewfinder
screen.)
e.g.: With the default setting of ND, the '!' indicator is
displayed when an ND filter other than 1 is selected.
--- : When a CCU is connected (cannot be changed)
Sets MARKER to ON/OFF.
1: Entire cross
2: Entire cross with a hole
3: Center
4: Center with a hole
OFF(ASSIST IND): Displayed when INDICATOR of
<FOCUS ASSIST> is ON.
OFF(AF DISP): Displayed when AF DISPLAY of
<LENS> is ON.
(4.3): If VF SCAN is set to 4:3 when HDLA is attached
(cannot be changed)
(ON): If VF SCAN is set to 4:3 when HDLA is attached
(cannot be changed)
Sets the darken level outside the aspect area.
Sets the safety marker in Aspect mode.
OFF(AREA): Displayed when AREA MARKER of
<FOCUS ASSIST> is ON.