Selecting - Sony super motion hdc4300 Operation Manual

Selecting Pages
When selecting a page from a CONTENTS
page
Example: CONTENTS page of the OPERATION menu
If the screen can be scrolled, arrows will indicate
the direction of scrolling.
CONTENTS
01.<VF DISPLAY>
02.<'!'IND>
03.<VF MARKER>
,
marker
04.<VF DETAIL>
05.<DYNAMIC FOCUS>
06.<KINETIC FOCUS>
07.<FOCUS POSITION METER1>
08.<FOCUS POSITION METER2>
09.<FOLLOW FOCUS>
10.<FOCUS ASSIST>
Turn the MENU SEL knob/ENTER button to align the arrow
marker (,) to the page to be set and press the MENU SEL
knob/ENTER button.
The selected page is displayed.
<VF DETAIL>
VF DETAIL :
CRISP
FREQUENCY:
FLICKER
AREA
ZOOM LINK:
COLOR DETAIL :
PEAK COLOR
CHROMA LEVEL: 100%
To change the displayed page
1
Check that the arrow marker (,) is located at the left
of the page number, then press the MENU SEL knob/
ENTER button.
The arrow marker (,) changes to a flashing question (?)
mark.
<VF DETAIL>
VF DETAIL :
CRISP
FREQUENCY:
FLICKER
AREA
ZOOM LINK:
COLOR DETAIL :
PEAK COLOR
CHROMA LEVEL: 100%
2
Turn the MENU SEL knob/ENTER button to flip
through the pages.
00 TOP
Page number
04 TOP
ON 25%
: 0
9M
: OFF
: 70%
ON 100%
ON BLUE
: ON
Flashes
? 04 TOP
ON 25%
: 0
9M
: OFF
: 70%
ON 100%
ON BLUE
: ON
3
When the desired page is displayed, press the MENU
SEL knob/ENTER button.
The "?" mark changes back to the arrow marker (,), and
operations with the displayed page are enabled.
To return to the TOP MENU screen
Align the arrow marker (,) with "TOP" at the top right of the
menu page then press the MENU SEL knob/ENTER button.
<VF DETAIL>
VF DETAIL :
CRISP
FREQUENCY:
FLICKER
AREA
ZOOM LINK:
COLOR DETAIL :
PEAK COLOR
CHROMA LEVEL: 100%
The TOP MENU screen appears.
Setting Menu Items
If a "?" mark is flashing at the left of the page number, press
the MENU SEL knob/ENTER button to change it to the arrow
marker (,). Setting on the displayed page is enabled.
1
Turn the MENU SEL knob/ENTER button to align the
arrow marker (,) with the desired item.
2
Press the MENU SEL knob/ENTER button.
The arrow marker (,) changes to a flashing question (?)
mark.
3
Turn the MENU SEL knob/ENTER button to change
the setting value.
When the knob is rotated quickly, the values will change
quickly; when rotated slowly, the values will change slowly.
To reset a changed value
If you press the CANCEL/STATUS switch toward
CANCEL before pressing the MENU SEL knob/ENTER
button, the setting will be returned to its previous value.
To interrupt settings
Set the DISPLAY switch to OFF to turn off the menu
screen display.
The setting operation can be restarted by setting the
DISPLAY switch back to MENU.
4
Press the MENU SEL knob/ENTER button.
The "?" mark changes back to the arrow marker (,), and
the new setting will be registered.
5
To change other setting items on the same menu
page, repeat steps 1 through 4.
28
04 TOP
ON 25%
: 0
9M
: OFF
: 70%
ON 100%
ON BLUE
: ON