Panasonic KX-FP181E Operating Instructions Manual page 39

Sending to pre-programmed parties in the broadcast memory
The same document will be sent to the specific parties whose numbers are stored in broadcast
memory.
The fax memory capacity for transmission is approx. 25 pages based on the ITU-T No. 1 Test
Chart in standard resolution (p. 86).
1 Insert the document FACE DOWN.
If necessary, press
repeatedly to select the desired setting
(p. 30).
Rotate
2 EASY DIAL
displayed.
Display:
Press FAX START
3
The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each station, calling
each number sequentially.
After transmission, the stored document will
be erased automatically, and the unit will
automatically print a broadcast sending
report (see below).
Note:
If you select the "FINE", "SUPER FINE" or "HALF
TONE" resolution, the number of pages that the unit
can transmit will decrease.
If one of the stations is busy or does not answer, the
station will be skipped. All skipped stations will be
redialled up to 5 times after all of the other stations
have been called.
Sample of a broadcast sending report
BROADCAST REPORT
NO. OTHER FACSIMILE
01 Mike
02 Peter
03 Sam
04 Kim
RESOLUTION
until the following is
<BROADCAST>
.
START TIME USAGE TIME
10 Jan. 09:31 01'10
10 Jan. 09:33 01'08
10 Jan. 09:34 01'09
10 Jan. 09:35 01'10
TOTAL 004'37
Sending Faxes
Display
EASY DIAL
FAX START
SET
To cancel the broadcast setting
STOP
1. Press while the unit displays the
following message.
Display:
The display will show the following.
2. Press .
SET
10 Jan. 2000 09:36
YOUR LOGO :
YOUR FAX NO. :
PAGES
02
02
02
02
008
STOP
RESOLUTION
BROADCASTING
SEND CANCELLED?
YES:SET/NO:STOP
RESULT
OK
OK
OK
OK
37