7-6. Test Operation Check
7-6-1. Fan Check
Push the Start/Stop button on the remote controller.
Select the "
Fan" operating mode.
Is air discharged from the discharge port of
the indoor unit?
Is the sound normal?
Check every indoor unit in turn.
START
YES
YES
Normal
Check code
appears
When a check code has been
displayed on the remote
controller, remove the cause
of the trouble, referring to
"Check code and check
Check code
position displayed on remote
appears
controller and outdoor unit."
NO
Check the indoor fan, fan
motor, and fan circuit.
NO
Check positions around the
fan.
− 122 −