Table of Contents
Advertisement
3. Using the No-Bark Collar
3.1
Powering On/Off the Collar Unit
Press the POWER KEY
Indicator LED lights up in green for 3 seconds to indicate that the unit is starting
normal operation and is ready to be placed on your dog.
NOTE
After powering off the Collar Unit, the smart system retains the last level of static
correction that your dog responded to, and use that correction level the next
time the Collar Unit is powered on.
3.2
Select Level of Static Correction
Your No-Bark Collar is a smart bark detection device. If there is a bark from your
dog, it delivers static correction to discourage or stop your dog from barking
(see ""Free" Bark Duration" on page 13).
The Indicator LED flashes quickly in green and red when delivering static
correction.
1. Press and hold the STATIC CORRECTION KEY
3 seconds.
The static correction level indicator will blink.
2. Short press on the STATIC CORRECTION KEY
correction (from 0 to 9 in cyclic order).
3. Press and hold the STATIC CORRECTION KEY
to confirm the level that you have selected on step 2 above.
4. Press the STATIC CORRECTION KEY
of correction.
The Static Correction Level Indicator on the Collar Unit shows the current
level of correction (from 0 to 9).
12
once to power it on or off. When powered on, the
on the Collar Unit for
to adjust the level of
for another 3 seconds
once to check the current level
Using the No-Bark Collar
Advertisement
Table of Contents
