Makita TD0101 Technical Information page 5

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-1. Hammer Case Complete
ASSEMBLING
(2) Set the assembled Hammer case complete in the same position as disassembling. And assemble as illustrated
in Fig 6.
Fig 6
Assemble Hammer case complete
by turning Bearing box counter clockwise.
The fastening torque is 25 - 30 N.m.
Bearing box
(3) Join Motor section with Hammer case complete. And assemble them to Housing set (L). Refer to Fig. 3.
(4) Assemble Brush holder and Carbon brush. And then, assemble Housing set (R). Refer to Fig. 3.
(5) Assemble Hammer case cover and Bumper as illustrated in Fig. 7.
Fig. 7
Groove of Hammer case for
accepting the hooks of
Hammer case cover
hook
Hammer
case cover
Fit the hooks of Hammer case
cover to the groove of Hammer
case complete.
1R223
1R224
Hammer case complete
134847-1
Hammer
case cover
134847-1
Bearing box
Hammer case complete
Vise
Assemble Bumper while fitting
the hollows to the hooks of Hammer
case cover.
hollows for fitting
to hooks of Hammer
Bumper
case cover
hook
P 5/ 14