SPIN
RINSE HOLD
22
If you switch on the washing
machine, the last used programme
and spin speed setting will appear on
the control panel .
If you change the programme, the
default spin speed of the selected
programme will appear on the
display .
To avoid automatic spinning of the
laundry at the end of the programme .
The laundry remains in the last rinse
water, the programme does not
proceed .
Suitable for delicate laundry which
is not appropriate for spinning, or
which should be spun with a lower
spin speed .
Not appropriate for silk .
To terminate the "Rinse hold", choose
between:
If you want to change the spin speed,
press the Spin button, turn the knob
to select the desired spin speed and
press the knob to confirm .
If you select spin speed "0", the rinse
water will be drained at the end of
the programme, and there will be no
final spin cycle .
• draining the water, no spinning:
turn the knob to select spin speed
"0", then press "Start/Pause": the
water will be drained and the
programme ended
• spinning the laundry:
the default spin speed blinks - start
the spin cycle by pressing "Start/
Pause" . Or select a different spin
speed by turning the knob, press it
to confirm the selected spin speed,
and press Start/Pause to start the
spin cycle