Aquos Link Setup; Aquos Link One Touch Recording - Sharp LC-46HD1E Operation Manual

Connecting external devices
Connecting an AQUOS BD Player/
AQUOS Recorder only
AQUOS BD Player/
AQUOS Recorder

AQUOS LINK setup

E
AQUOS LINK Auto power on
If this is activated, the One Touch Play function is
enabled.
While the TV is in standby mode, it automatically turns
on and plays back the image from the HDMI source.
1
Press MENU and the TV menu screen displays.
2
Press c/d to select "Setup", and then press
OK.
TV menu
Setup
AQUOS LINK setup
Stations
Child lock
Timer functions
Language
Miscellaneous
3
Press a/b to select "AQUOS LINK setup", and
then press OK.
4
Press a/b to select "Auto power on".
5
Press c/d to select "yes".
NOTE
• The factory default for this item is "no".
20
Downloaded From TV-Manual.com Manuals
Certified HDMI cable
(commercially available)
Εxtended functions Picture
E
Selecting recorder
Here, you can select a recorder for the recording from
several connected recorders.
1
Repeat steps 1 to 3 above.
2
Press a/b to select "Recorder selection", and
then press OK.
3
Select the recorder, and then press OK.
NOTE
• If you have connected AQUOS Audio speaker system
between the TV and AQUOS Recorder, External source's
indication changes from "EXT5" to "EXT5 (Sub)", for
TV
example.

AQUOS LINK One Touch Recording

Preparation
Make sure your CEC-compatible recorder is ready to
record. Check antenna and cable connections and the
remaining capacity of the HDD or DVD disc.
1
Open the remote control's flip cover.
2
Press REC E.
• The channel of the CEC-compatible recorder
now changes to that of the TV, and recording
automatically begins.
3
Press REC STOP H to stop recording.
Sound