ELECTRONIC CONTROL DIAGNOSTIC MODE AND COMPONENT TESTING
Failure/Error Codes
The following two pages contain information about
error codes and what to look for when you
encounter a specific condition. This information
is a portion of the information that is in the
Tech Sheet, but provides a more direct picture
of the repair. Always reference the Tech Sheet
when diagnosing error codes. Follow all safety
warnings
When measuring resistance, always
disconnect power.
When measuring live voltage, complete the
following steps:
1. Disconnect power.
2. Connect voltage measurement
equipment to proper connectors.
3. Reconnect power and confirm voltage.
4. Disconnect power and reassemble all
parts and panels before operating.
3-6
Built-In Single and Double Wall Oven
n