Palsonic DVD7500 User Manual page 10

Getting Started
System Connection
Audio Connection
.
The unit supports two choices of audio output: Analogue Audio and Digital Audio. Analogue
Audio includes stereo 2 channel and Digital Audio provides optical and coaxial outputs. Digital
Audio includes optical and coaxial output, Digital Audio obtains a greater effect than analogue.
Stereo Output
.
Connect a couple of RCA (right, white left) to the mixing audio of the unit and to the
stereo input of the TV or amplifier.
Coaxial Output
.
Connect the special coaxial cable to the coaxial output of the unit and to the
corresponding input of your decoder/amplifier (with digital coaxial input).
Optical output
.
Connect special optical cable to the optical output of the unit and to the
corresponding input of your decoder/amplifier (with digital optical input).
Note:
.
Select the type of connection depending on your equipment, if only TV available, only
stereo output can be used.
.
If 5.1 ch amplifier is available you can appreciate AC-3 home theatre effects.
.
If an amplifier with coaxial or optical inputs is available, you can appreciate DTS and
MPEG-II digital sound effects.
.
Each connection must match to the internal setup of the unit, please refer to the
instruction of karaoke and system setup.
8