Nearby Device Scanning Settings
Scan for and connect to nearby devices. You will receive notifications when there are available
divides to connect to.
1. From home, tap
2. Tap
More networks > Nearby device scanning.
3. Tap On/Off to enable this feature.
Mobile Networks Settings
Set options for network selection and data service.
1. From home, tap
2. Tap
More networks > Mobile networks.
3. Configure options:
Mobile data: When enabled, your phone connects to the mobile data network, and can use
l
the network to access the Internet and transfer information.
Access Point Names: Configure access points (not common).
l
Network mode: Choose a preferred network mode. Available options depend on your
l
phone's features, but will typically include: CDMA, LTE/CDMA, GSM/UMTS, and Automatic
(the recommended setting).
Connections optimizer: When enabled, Connections optimizer helps you manage and
l
enhance your data experience by finding and connecting to "remembered" Wi-Fi networks,
and, if applicable, the 4G LTE network. Remembered networks are those to which you have
already connected. Options include:
Connections Optimizer: Automatically select the best network.
o
Partner Wi-Fi: Automatically connect to Partner Wi-Fi Hotspots.
o
Clear EULA acceptance data: Clear all saved captive portal EULA acceptance data
o
saved on the device.
Network operators: Configure network operators while using international GSM networks.
l
VPN Settings
Set up and manage Virtual Private Networks (VPN).
Note: VPN settings include storage of login credentials on your phone. You must configure a PIN,
password, or fingerprints screen lock before setting up a VPN.
Apps >
Settings.
Apps >
Settings.