Turning The Printer Off - Canon LBP3460 User Manual

Turning the Printer OFF

Turn the printer OFF using the following procedure.
IMPORTANT
If the printer is connected to a network, make sure that other computers are not sending
•
print data to the printer before turning the printer OFF.
If you turn the printer OFF when the Job indicator is on, all the print data remaining in the
•
printer memory will be erased. If there is any necessary print data remaining in the
printer, wait until it is output, or press [Reset] in the offline state and then select FORM
FEED to output the data before turning the printer OFF. (See p. 2-9)
Do not turn the power OFF when the printer is in any of the following status:
•
- During printing
- While the printer is running a self-diagnostic test immediately after turning the power
- While a message informing you that the NVRAM is being initialized or being written is
- While <02 WARMING UP> is displayed
Downloaded from ManualsPrinter.com Manuals
If no abnormality is found during the self-diagnostic test, the Online indicator,
Ready indicator and Paper Source indicator for the currently selected paper
source come on, <00 READY> appears in the display, and the printer is ready to
print.
Ready Indicator
Paper Source Indicator
The following information is displayed in the display.
Printable and not
processing print data
ON
displayed
Online Indicator
00 READY A4
Size of paper in the currently
selected paper source
Turning the Printer ON/OFF
2
2-3