Step 1: Charging Your Handheld - palmOne Tungsten T5 User Manual

CHAPTER 1
[ ! ]
Before You Begin
If you're upgrading from
another Palm Powered
device, synchronize your
old handheld with your
old desktop software.
Tip
After the initial charge,
charge your handheld at
least half an hour every
day.
Tungsten™ T5 Handheld
Setting Up Your Handheld and Your Computer

Step 1: Charging your handheld

0
1
Connect your handheld:
a. Plug the USB sync cable into
your handheld and into a USB
port on the back of your
computer.
b. Plug the AC charger into the
Multi-connector on the sync
cable and into an outlet.
2
Charge your handheld for three hours. Be sure your handheld is fully charged
before going on to Step 2.
Done
4