Handheld Do's And Don'ts - palmOne E2 Getting Started

Palm tungsten getting started guide e2
Hide thumbs Also See for E2:
Table of Contents

Advertisement

CHAPTER 1
Did You Know?
Your handheld saves
information in storage
memory permanently.
Even if the battery drains
completely, none of your
information is lost.
Simply recharge to
access the information
again.
Tungsten™ E2 Handheld
Your Handheld

Handheld do's and don'ts

To protect your handheld from damage and ensure reliable performance, follow these guidelines.
Handheld do's
• Use only the stylus to tap the screen—no pens, pencils, paper clips, or other sharp objects.
• Use only the supplied power adapter to charge your handheld.
• Keep the battery charged.
• Keep the screen free of dust (or anything else that could make it dirty).
• For general cleaning, use a soft, damp cloth. If the screen becomes dirty, use a soft cloth
moistened with a diluted window-cleaning solution.
• Use only 3.5 mm stereo headphones in your handheld's headphone jack.
• Be sure to get rid of any static electricity buildup before you connect your handheld to any cable
or accessory.
Handheld don'ts
• Do not drop, bang, or otherwise cause a strong impact to your handheld.
• Do not carry your handheld in your back pocket; you might sit on it by mistake.
• Do not let your handheld get wet; don't even leave it in a damp location.
• Do not expose your handheld to very hot or cold temperatures, including placing it near a
heater, leaving it in the trunk of a car, or setting it by a window in direct sunlight.
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tungsten e2

Table of Contents