Fuel Filter; Spark Plug - Echo SHC-225S Operator's Manual

SHC-225/S
2. Remove air filter cover. Brush dirt from
inside cover.
3. Replace filter if it is damaged, fuel soaked,
very dirty, or the rubber sealing edges are
deformed.
• Lightly brush debris from filter.
• Soak heavily soiled filters in water/
detergent solution to loosen dirt, then
brush lightly.
• Rinse with clean water and allow to dry
completely before reuse.
4. Install air filter in air filter case.
5. Install air filter cover.

Fuel Filter

Level 1.
Parts Required:
Fuel is VERY flammable. Use extreme care when mixing, storing or
handling, or serious personal injury may result.
1. Use a clean rag to remove loose
dirt from around fuel cap and
empty fuel tank.
2. Pull the fuel filter from the fuel
tank.
3. Remove the filter from the line and
install the new filter.
Note: Federal EPA regulations
require all model year 2012
and later gasoline powered
engines produced for sale in
the United States to be equipped with a special low permeation
fuel supply hose between the carburetor and fuel tank. When
servicing model year 2012 and later equipment, only fuel supply
hoses certified by EPA can be used to replace the original
equipment supply hose. Fines up to $37,500 may be enforced for
using an un-certified replacement part.

Spark Plug

Level 2.
X7502257007
© 4/2016 ECHO Inc.
TM
REPOWER AIR & FUEL FILTER KIT.
MAINTENANCE
25