Connecting To A Stereo System; Connecting To A Digital Av Receiver - Toshiba SD4300KU Owner's Manual

Connections

Connecting to a Stereo System

Stereo System with Left/Right Audio In Jacks
A
Select one of the video connections (CVBS VIDEO
IN or COMPONENT VIDEO IN)
depending on the options available on your TV.
B
Use the audio cables (white/red) to connect AUDIO
OUT (L/R) jacks of the DVD Player to the
corresponding AUDIO IN jacks on the stereo system.
Helpful hint: Before making or changing any connections, make sure that all the devices are
disconnected from the power outlet.
7

Connecting to a Digital AV Receiver

Receiver has a PCM, Dolby Digital or MPEG
decoder
A
Select one of the video connections (CVBS VIDEO IN
or COMPONENT VIDEO IN)
depending on the options available on your TV.
B
Connect the COAXIAL jack of the DVD player to the
corresponding Digital Audio In jack on your Receiver
(cable not supplied).
C
Set the DVD Player' s Digital Output to PCM or All
depending on the capabilities of your Receiver (see
page 19 {Digital Output}).
Tip:
-If the audio format of the Digital Output does not
match the capabilities of your receiver, the receiver
will produce a strong, distorted sound or no sound at
all.