Connections; Connecting To A Tv; Connecting To A Stereo System; Connecting To The Digital Amplifier/Receiver - Toshiba SD1020KB Owner's Manual

3 Connections

Make the following connection to use this product.

Connecting to a TV

Connecting to the Composite Video/Audio
(CVBS) jack
Use the composite video cable (yellow) to connect
the DVD player's VIDEO (CVBS) jack to the video
input jack (or labelled as A/V in, Video In or
Composite) on the TV (cable not supplied).
To hear the sound of this DVD player through your
TV, use the audio cables (white/red) to connect
AUDIO OUT (L/R) jacks of the DVD player to
corresponding AUDIO IN jacks on the TV (cable
not supplied).
AUDIO IN
VIDEO IN
(not supplied)
(Sample Illustration) Connecting to a TV - Composite
Video/Audio (CVBS) jack
AUDIO IN
VIDEO IN
Connecting to the SCART jack
Use the scart cable to connect the DVD SCART
OUT to the corresponding SCART input jack on
the TV (cable not supplied).
If your DVD player will not be connected to a
Stereo System or AV Receiver to hear better
sound, SCART is enough for both audio and video
connections.
(Sample Illustration) Connecting to a TV - SCART jack

Connecting to a Stereo System

Select one of the video connections (CVBS VIDEO
8
Audio cable
Scart cable
(not supplied)
IN or SCART IN) on the TV and use the audio
cables (white/red) to connect AUDIO OUT (L/
R) jacks of the DVD player to the corresponding
AUDIO IN jacks on the Stereo System (cable not
supplied).
AUDIO IN
VIDEO IN
Audio cable
(not supplied)
(Sample Illustration) Connecting to a Stereo System
Connecting to the digital amplifier/
receiver
Route the sound from this player to other device
to enhance audio output.
Connect a coaxial cable from the COAXIAL
DIGITAL OUT jack on this product to the COAXIAL
jack on the device.
Digital audio coaxial
cable (not supplied)
Digital AV receiver/amplifier
(Sample Illustration) Connecting to a digital AV
receiver/amplifier

Connecting Power

After all the AV connections are made, connect
the AC power cable to the wall socket.
• T he product is ready to be set up for use.
Notes:
• Before connecting the AC power cord, ensure
you have completed all other connections.
• Risk of product damage! Ensure that the power
supply voltage corresponds to the voltage
printed on the back of the unit.
• The type plate is located on the back of the
unit.