Ec Declaration Of Conformity - Husqvarna 525P4S Operator's Manual

Guide bar and saw chain combinations
The following combinations are CE approved.
Guide bar
Length, inch
10
12
EC Declaration of Conformity (Applies to Europe only)
Husqvarna AB, SE561 82 Huskvarna, Sweden, tel +46-36-146500, declares under sole responsibility that the pole
saws Husqvarna 525P4S and 525P5S with serial numbers dating 2016 and onwards (the year is clearly stated on the
rating plate, followed by the serial number), comply with the requirements of the COUNCIL'S DIRECTIVE:
- of May 17, 2006 "relating to machinery" 2006/42/EC.
- of February 26, 2014 "relating to electromagnetic compatibility" 2014/30/EU.
The following standards have been applied:
EN ISO 12100:2010, CISPR 12:2009, EN ISO 11680-1:2011, EN ISO 14982:2009
0404, SMP Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has carried out EC type examination
in accordance with the machinery directive's (2006/42/EC) article 12, point 3b. The certificate for EC type examination
in accordance with annex IV, has the number:
0404/15/2438
Huskvarna March 30, 2016
Per Gustafsson, Development manager (Authorized representative for Husqvarna AB and responsible for technical
documentation.)
28 – English
TECHNICAL DATA
Pitch, inch Gauge, mm
3/8 1,3
3/8 1,3
Saw chain
Length, drive links
Type
(no.)
Husqvarna H37 40
Husqvarna H37 45