Selecting an aspect ratio
1.
Press ASPECT button on the remote control.
Each time you press the button, the projector switches
the mode for aspect ratio in turn.
For a computer signal
CP-X8800:
NORMAL 4:3 16:9 16:10
CP-WU8600, CP-WX8650, CP-WU8700, CP-WX8750:
NORMAL 4:3 16:9 16:10 NATIVE
For HDMI
, HDBaseT
TM
CP-X8800:
NORMAL 4:3 16:9 16:10 14:9
CP-WU8600, CP-WX8650, CP-WU8700, CP-WX8750:
NORMAL 4:3 16:9 16:10 14:9 NATIVE
For a video signal
CP-X8800:
4:3 16:9 14:9
CP-WU8600, CP-WX8650, CP-WU8700, CP-WX8750:
4:3 16:9 16:10 14:9 NATIVE
For an SDI signal (CP-WU8700 only)
NORMAL 4:3 16:9
For an input signal from the LAN port, or if there is no signal
CP-X8800: 4:3 (fixed)
CP-WU8600, CP-WX8650, CP-WU8700, CP-WX8750: 16:10 (fixed)
NOTE
• ASPECT button does not work when no proper signal is input.
• NORMAL mode keeps the original aspect ratio setting.
, and DisplayPort signals
TM
Operating
ASPECT
button
39