Features; Assembly - Craftsman 315.ID2025 Operator's Manual

PRODUCT SPECIFICATIONS
Motor ............................................................... 19.2 Volt DC
Coupler ...................................................................... 1/4 in.
Impacts Per Minute:
High ............................................................ 0-3,400 IPM
Medium ....................................................... 0-2,000 IPM
Low ................................................................ 0-850 IPM
KNOW YOUR IMPACT DRIVER
See Figure 1, page i.
The safe use of this product requires an understanding
of the information on the product and in this operator's
manual as well as a knowledge of the project you are at-
tempting. Before use of this product, familiarize yourself
with all operating features and safety rules.
AUTO-LOAD COUPLER
The auto-load coupler provides fast, easy one-handed bit
loading and ejecting.
BIT STORAGE
When not in use, bits provided with the impact driver
can be placed in the storage area located on base of the
handle.
UNPACKING
This product has been shipped completely assembled.
 Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if it is not
completely assembled or if any parts appear to be
missing or damaged. Use of a product that is not
properly and completely assembled could result in
serious personal injury.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
1-800-932-3188 for assistance.

FEATURES

Switch ....................... (VSR) Variable Speed and Reversible
No Load Speed ............0-1500/0-2400/0-3200/min. (RPM)
Torque:
High .................................................... Up to 1,605 in.lb.
Medium ............................................................ 900 in.lb.
Low .................................................................. 600 in.lb.
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE/CENTER LOCK)
The direction of rotation (forward/reverse/center lock)
selector located above the switch trigger will change the
direction of bit rotation.
ELECTRONIC SPEED SELECTOR
This impact driver has an electronic speed selector for
more precise control when driving screws. Press the
speed selector button on the foot of the impact driver to
cycle through HIGH, MEDIUM, and LOW speeds.
TRI-BEAM LED
The tri-beam LED provides optimum illumination and
eliminates shadows on work surface.
VARIABLE SPEED SWITCH TRIGGER
This tool has a variable speed switch that delivers higher
speed with increased trigger pressure. Speed is controlled
by the amount of switch trigger depression.

ASSEMBLY

PACKING LIST
Impact Driver
Phillips and Slotted Bits
Socket Adaptor
Operator's Manual
WARNING:
not operate this product until the parts are replaced.
Use of this product with damaged or missing parts
could result in serious personal injury.
WARNING:
or create accessories not recommended for use
with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
cause serious personal injury, always remove the bat-
tery pack from the product when assembling parts.
7 - English
If any parts are damaged or missing do
Do not attempt to modify this tool
To prevent accidental starting that could