JVC Everio GZ-RX610 Detailed User Manual page 96

Using Wi-Fi
Connecting Smartphone Directly to Camera (Wi-Fi Direct)
Connect the smartphone directly (Wi-Fi Direct) to the camera by either of the
following methods.
Connection by entering the Wi-Fi password
o
1
Tap "MENU".
(Operation on this camera)
Set the camera to the recording mode.
.
The top menu appears.
0
2
Tap the "Wi-Fi" (Q) icon.
(Operation on this camera)
.
3
Tap the "DIRECT CONNECTION" (N) icon in the "Wi-Fi" menu.
(Operation on this camera)
.
When "50p" is selected for "SYSTEM SELECT", the following display
0
appears and recording mode is switched to the 50i mode.
.
4
Check the SSID and the PASS being displayed on the screen of the
camera.
.
96
5
Select the SSID in step 4 from the Wi-Fi network selection screen of your
smartphone, and enter the PASS on the password screen.
(Operation on the smartphone)
.
For details on connecting your smartphone to a Wi-Fi network, please
0
refer to the instruction manual of the device in use.
6
A connection is established and Q appears on the camera's screen.
.
Connection by Wi-Fi Protected Setup (WPS)
o
1
Tap "MENU".
(Operation on this camera)
Set the camera to the recording mode.
.
The top menu appears.
0
2
Tap the "Wi-Fi" (Q) icon.
(Operation on this camera)
.