JVC Everio GZ-RX610 Detailed User Manual page 138

Using Wi-Fi by Creating a QR Code
6
Tap "EZ REGISTRATION WPS".
(Operation on this camera)
.
7
Activate WPS of the access point (wireless LAN router) within 2 minutes.
To activate WPS, refer to the instruction manual of the device in use.
0
8
After registration is complete, tap "OK" on the camera's screen.
(Operation on this camera)
.
The following registration methods are also available.
0
"Registering Access Point Using WPS PIN" (A p. 111)
"Registering Access Point Manually" (A p. 143)
Connecting Smartphone to Access Point (Wireless LAN
Router)
Connect the smartphone to the access point (wireless LAN router) at
0
home.
This setting is not required if the smartphone has already been connected
0
to the access point (wireless LAN router) at home.
Regular Operation
o
Monitoring the images by connecting the smartphone and the
camera
Operation on this camera
o
1
Tap "MENU".
(Operation on this camera)
.
The top menu appears.
0
2
Tap the "Wi-Fi" (Q) icon.
(Operation on this camera)
.
138
3
Tap "ACCESS POINT CONNECTION".
(Operation on this camera)
.
4
Start making a connection.
(Operation on this camera)
.
Name (SSID) of the access point (wireless LAN router) in connection
0
is displayed.
5
The following is displayed when the camera is connected to the access
point.
.
Tap "URL" to display the URL required for connecting the camera
0
from browser.
Operation on the smartphone
o
Memo :
Prior to use this function, a smartphone application needs to be installed
0
on the smartphone.
"Installing Smartphone Applications" (A p. 114)
1
Start "Everio sync. 3" on the smartphone after setting "INDOOR
MONITORING".
.
Tap "START" in INDOOR MONITORING on the camera to start.
0