Put On The Door Panel; Connecting The Refrigerator - Dometic RM5310 Installation Manual

Put on the door panel

8 Put on the door panel
A
NOTICE! Beware of damage
Only ever lay the refrigerator on its side and never on its back.
Otherwise the unit may be damaged.
The door panel must have the following dimensions:
 RM5310: 534 x 455 x max. 3 – 3.8 (H x W x D in mm)
 RM5330/RM5380/RM5385: 740 x 455 x max. 3 – 3.8 (H x W x D in mm)
➤ Put on the door panel as shown (fig. b, page 10).
9

Connecting the refrigerator

9.1 Connecting to the gas supply
A
NOTICE!
 This refrigerator may only be connected to the gas supply by
a specialist in accordance with the applicable guidelines and
standards.
 Only use cylinders of propane or butane gas (not natural gas
or city gas) with an approved pressure reduction valve and
suitable head. Compare the pressure information on the type
plate with the pressure information on the pressure regulator
on the propane or butane gas cylinder.
 Only operate the refrigerator at the pressure shown on the
type plate.
 Please note the pressures which are permitted in your country.
Use a DIN-DVGW-approved pressure regulator with a fixed
setting:
– The following applies for Germany: DIN EN 12864
– The following applies for Europe: EN 732 and EN 1949
I
NOTE
The refrigerator is equipped for a connection pressure of 30 mbar.
Use a Truma VDR 50/30 back-pressure regulator when con-
nected to a 50 mbar system.
24
RM5310 – RM5385
EN