Table of Contents
Advertisement
MemoryFrame User's Manual
After connecting, the Windows® Hardware Wizard will detect the
MemoryFrame. When the Hardware Wizard begins, the following
screen should be displayed:
Figure 8 – Windows Hardware Found Wizard
Click Next to begin installation.
The next step is INSTALL HARDWARE DEVICE DRIVERS. To do
so, select the install method for the "Digital Picture Frame". Select
"Search for suitable driver for my device" and click Next to continue
installation.
Next, in the LOCATE DRIVER FILES screen, select the device where
the MemoryFrame "Digital Picture Frame" USB driver can be found.
The MemoryFrame "Digital Picture Frame" USB driver resides on the
Digital PixMaster software CD. Insert the CD-ROM into the appropriate
device and select the CD-ROM drive checkbox. Then click on Next to
continue the installation.
After Windows® finds and installs the driver, the COMPLETING THE
NEW HARDWARE WIZARD screen will be displayed. Click on
Finish to complete the installation.
Page 17
Copyright© 2002 Pacific Digital Corporation
Advertisement
Table of Contents
