Table of Contents
Advertisement
MemoryFrame User's Manual
Reverse (◄)
On/Off Switch
Power Connector
USB Connectors
Figure 4 – Power & USB Connectors
Copyright© 2002 Pacific Digital Corporation
functions as the "Select" key to select a photo or
menu options.
During a slideshow, press the ◄ button to
transition to the previous photo in the slideshow.
When viewing a user-interface menu (see Menu
button), use this button to highlight the previous
menu option.
The On/Off Switch is the main power control for
the MemoryFrame. Be sure that the power is Off
before plugging in or unplugging MemoryFrame
from the wall socket. This will help protect the
electronics from possible power surge damage.
The Power Connector is the connection point for
the supplied power adapter, and is used to
provide main power to the MemoryFrame. The
input is 12 VAC developed through the supplied
AC power adapter.
There are 2 USB connectors as shown in Figure
4 on the following page. The one marked
"Camera" is used to transfer images from a
camera or USB memory-card-reader. The one
marked "PC" is used to transfer shows to/from a
PC running the bundled Digital PixMaster
software.
Page 11
Advertisement
Table of Contents
