Ejecting Multiple Compact Discs; Compact Disc Playback; Compact Disc Selection - Ford Ranger Owner's Handbook Manual

Ejecting CDs from a specific tray
number
• Press and hold the CD eject button
for about two seconds until a beep
sound is heard. The 'DISC OUT'
display flashes.
• Press the channel preset button for
the desired CD number for less than
five seconds after the beep sound is
heard.
• Pull out the CD.
EJECTING MULTIPLE
COMPACT DISCS
• Press and hold the CD eject button
for about two seconds until a beep
sound is heard. The 'DISC OUT'
display flashes.
• Press the CD eject button again within
five seconds after the beep sound is
heard.
• Pull out the CD, then the next CD will
be ejected.
• When all discs have been ejected and
removed, the radio reception is
restored.
Note: If the button is not pressed and
about five seconds have elapsed when
'DISC OUT' is flashing, CDs are
automatically ejected.
Note: CDs will be ejected starting with
the one with the lowest number.
Note: All CDs in the tray will be ejected
continuously.
Note: CDs can be ejected when the
ignition switch is off. Press and hold the
CD eject button for about two seconds
and all CDs will eject.
Compact disc player
136

COMPACT DISC PLAYBACK

During radio reception, press the CD play
button once to start play when there is a
CD in the unit.
If there isn't a CD in the unit when the CD
play button is pressed, 'NO DISC' will flash
on and off.

COMPACT DISC SELECTION

6-disc in dash CD player
When the CD play button is pressed,
playback will recommence from wherever
it was last stopped.
If that disc is no longer available, playback
will start from the next disc and then
continue in ascending order, i.e. disc three
follows disc two. When the disc in the
highest loading position has been played,
playback will continue with the disc in the
lowest loading position and go through
the same cycle.
You can, however, switch to a disc of your
choice by pressing the DISC UP or DOWN
buttons during playback.
The audio unit remembers which discs
are available so it will not select a disc that
it knows to be missing. If you select a
missing disc using the DISC UP or DOWN
buttons, 'NO DISC' will be displayed and
playback will continue from the current
disc.
Note: To change the disc during MP3
playback, press and hold the DISC UP or
DOWN buttons for about two seconds.