Position Outdoor Sensor; Position Projection Alarm; Low Battery Icon - La Crosse Technology 616-143 Quick Setup Manual

POSITION OUTDOOR SENSOR


Mount the outdoor sensor on a North-facing wall or in any well
shaded area. Under an eave or deck rail is preferred.

The maximum transmitting range to the atomic projection alarm is
over 300-feet (91 meters) in open air, not including walls.
SEARCH FOR OUTDOOR SENSOR

Hold the +/TEMP button for 3 seconds to search for the outdoor
sensor .

POSITION PROJECTION ALARM


The projection alarm has a wide base to sit on a desk or table.

Choose a location 6 feet or more from electronics such as
cordless phones, wireless gaming systems, televisions,
microwaves, routers, baby monitors, etc., which can prevent
signal reception.

Position near an exterior wall that faces Ft. Collins Colorado for
WWVB time signal reception.

Place within 300 ft. (91 meters) of the outdoor sensor.

Obstacles such as walls, windows, stucco, concrete and large
metal objects can reduce the range.

Be aware of electrical wires and plumbing within a wall. This will
interfere with RF (radio frequency) signal reception.

LOW BATTERY ICON

When the low battery icon is displayed it warns to replace batteries.

If the icon is displayed in Outdoor Temperature section,
replace bateries in the outdoor sensor.

If the icon is displayed in Indoor Temperature section,
replace batteries in the outdoor sensor.
Model 616-143 www.lacrossetechnology.com/support
Outdoor Sensor
Reception icon
Low Battery
Icon
Page | 5