Programming Swi - PAC SWI-RC Installation Instructions Manual

Step 3 - Programming the SWI to Learn Steering Wheel Control Functions
The SWI-RC must be programmed in the specific order shown in the chart below. If you come across a command in the chart that your
6/18/2010 - 11:41 AM
steering wheel does not have, or you do not want to program, press the Program Button on the side of the SWI interface. The LED will
flash once rapidly and then stay on confirming that you have successfully skipped that command and are ready for the next button.
1
Switch Position
Alpine
Radio
1 Volume +
2 Volume -
3 Mute
4 Preset +
5 Preset -
6 Source
7 Track +
8 Track -
9 Power
10 Enter/Play
11 Band/Program Phone Receive
12
13
14
Step A.
Turn the vehicle ignition to
the ON position.
Step B.
Press and
hold program-
ming/mode
button on
SWI-RC.
Step C.
Release
programming/
mode button.
Step D.
Within 7 seconds, press and hold for 5
seconds the button that is to be learned
on the steering wheel. Please note if
using in conjunction with the OS-4 or
MS-FRD1 the Source, Media or Speak
buttons cannot be held for more than
1.5 seconds.
Step E.
Release the button.
Step F.
If you need to program more buttons,
4
repeat steps D & E for each additional
audio function on the steering wheel.
swi-rc radio and button chart.xls
2 3 4
JVC Kenwood Clarion
Volume + Volume + Volume + Volume +
Volume - Volume - Volume - Volume -
Mute Mute Mute
Source Source Source
Track + Play Search + Track +
Track - Track + Search - Track -
Band/Disc + Track - Band
Preset/Disc - Disc/FM +
Select Disc/AM -
Attenuation Answer
Phone Reject
Voice Dial
Power
IGN
ACC
STRT
OFF
LED will
stay lit for 7
seconds.
VOL
VOL
Program
remaining buttons
5 6
Advent, Boyo, Dual,
Visteon, Sony
Valor OEM
Volume + Volume +
Volume - Volume -
Mute Mute Mute
Source Source Preset +
Next Preset -
Previous Source
Up Cursor Play/Ok Track +
Down Cursor Band Track -
Ok Up Cursor Band
Down Cursor
BT Answer
BT Hangup
LED will light.
If you programmed the
module for version 4 please
refer to Appendix A
7 7
Pioneer Blaupunkt
Volume + Volume +
Volume - Volume -
Mute Mute
Preset + Source
Preset - Track +
Source Track -
Track + Disc +
Track - Disc -
Band Ok
Phone Menu
Answer Call
End Call
Voice Activation
LED will flash to
indicate set vehicle
version number.
The LED will turn off
during this process.
The LED will turn on
back on.
8