Precor 9.23 Service Manual page 5

Procedure 2.2
1. Set the on/off switch in the "on" position and remove the safety key from the console. Allow
the internal power supply to discharge, approximately 10 seconds, and then replace the
safety key on the console. Within 2 seconds of replacing the safety key, press the STOP,
INCLINE , SPEED
2. The odometer in miles or kilometers will be displayed in the DISTANCE window of the
display. See Diagram 2.1, below.
3. The hour meter will be displayed in the TIME window. See Diagram 2.1, below.
4. The upper PCA software version will be displayed in the main window.
5. Press the STOP key to exit this program.
Diagram 2.1 - 9.27 Display
Quick Start
Key
Incline Keys
Enter Key
20081-118
- Accessing the Odometer and Hour Meter
keys, sequentially.
9.23, 9.27 Treadmill
Distance
Window
Time
Window
Speed Keys
Stop Key
Page 5