Download Print this page

EnGenius EOC1650 Datasheet page 4

Wireless access point / client bridge / client router
Hide thumbs Also See for EOC1650:

Advertisement

Internal Antenna
External Antenna
Software Features
General
Topology
Protocol / Standard
Operation Mode
LAN
VPN
Wireless
Security
QoS
Management
Configuration
Firmware Upgrade
Administrator Setting
Reset Setting
System monitoring
* Theoretical wireless signal rate based on IEEE standard of 802.11b, g chipset used. Actual throughput may vary.
Network conditions and environmental factors lower actual throughput rate.
** All specifications are subject to change without notice.
Tolerance
1 x 7dBi Internal Panel Antenna
1 x 5dBi SMA Antenna
Infrastructure
IEEE 802.3 (Ethernet)
IEEE 802.3u (Fast Ethernet)
IEEE 802.11b/g (2.4GHz WLAN)
802.11 b/g
Access Point
Client Bridge
Client Router
DHCP Server
DHCP Client
VPN – Pass through
Channel Selection (Setting varies by countries)
Transmission Rate
11 b/g:54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 Mbps
Long distance transmission : 1km to 30km
Transmit power table
Signal Strength indication using LEDs (3 colors)
PPPoE (CR mode)
WEP Encryption-64/128/152 bit
WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
802.1x Authenticator
Hide SSID in beacons
MAC address filtering, up to 50 field
L2 isolation(AP mode)
Wireless STA (Client) connected list
WMM
Web-based configuration (HTTP)
- Upgrade firmware via web-browser
- Keep latest setting when f/w update
Administrator password change
- Reboot (Press 1 second)
- Reset to Factory Default (Press 5 seconds)
Status, Event Log
±1 dBm
Tolerance
±1 dBm
12/4/2008

Advertisement

loading