Advertisement
Wireless
2.4GHz It works in 2.4GHz frequency spectrum
-
High output power Transmit output power programmable for different country selections
-
High Data Rate High speed transmitting rate up to 54Mbps, support large payload such as MEPG video
-
streaming
Multifunction application Access Point / Client Bridge / Client Router
-
Long range transmitting Transmit power control and distance control (ACK timeout)
-
Signal Strength LED indicators have the best transmit and receive signal for traffic communication
-
Networking
Public wireless solution An AP interface that is especially useful in public areas such as hotspots and
-
enterprise
Signal Strength Display RF signal strength status shown LEDs of 3 colors, making network build-up
-
easier
QoS(WMM) Enhance performance and density
-
PPPoE Point-to-Point Protocol over Ethernet at Client Router mode. This function will keep trying when
-
failed or disconnected
BSSID Basic Service Set ID, supports 4 MAC address
-
Security
802.11i WEP, WPA, WPA2 (Encryption support TKIP/AES)
-
MAC address functions MAC address filter (AP mode)
-
802.1x IEEE802.1x Authenticator
-
L2 isolation
-
Station isolation
-
Management
Firmware Upgrade Upgrading firmware via web browser, setting are reserved after upgrade
-
Reset & Backup Reset to factory default. User can export all setting into a file via WEB
-
MIB MIB I, MIB II(RFC1213)
-
SNMP V1, V2c
-
* Theoretical wireless signal rate based on IEEE standard of 802.11b, g chipset used. Actual throughput may vary.
Network conditions and environmental factors lower actual throughput rate.
** All specifications are subject to change without notice.
Features
12/4/2008
Advertisement
