Loran Td Setup - Garmin GPSMAP 60CS Owner's Manual

To set up Loran TD from the Setup Menu:
1. Press the key twice to display the Main Menu, then press
MENU
again to display the Setup Menu.
2. Use the key to highlight the Location icon and press
ROCKER
ENTER to display the Location Setup Page.
3. Highlight the "Position Format" field and press
play the format list.
4. Highlight "Loran TD" press
5. To change the settings of any of the five fields, highlight the field,
press select/enter the desired setting, then press
ENTER
6. When done, highlight the 'Save' button and press
If the active GRI Chain, secondary stations, or offsets have been
changed since the waypoint was created, the waypoint now references the
active GRI-chain and secondary stations and adjust the TD coordinates
accordingly. Remember that the GPSmap 60CS is not relying on the
LORAN signal for navigation and actually converts the TD coordinate
to a useful LAT/LON coordinate before storing the waypoint to memory
or using it for navigation. Because of this, the unit can navigate to a TD
coordinate anywhere in the world.
You must know your GRI chain number and secondary stations to
create a LORAN TD position. For more information please read our
LORAN TD Position Format Handbook, available at the Garmin Web site,
at www.garmin.com/support/userManual.html.
ENTER
to display the Loran Setup Page.
ENTER
ENTER
to dis-
.
ENTER
.
(Position Format List with Loran TD selected.)
GPSmap 60CS
Appendix

Loran TD Setup

Location Setup Page
Loran TD Setup Page
91