2. Connect the positive battery lead first, then
connect the negative battery lead by installing
their bolt. NOTICE: When installing the bat-
tery, the main switch must be off, and the
positive lead must be connected before
the negative lead.
1. Positive battery lead (red)
2. Negative battery lead (black)
3. Install the battery holding plate by installing
the bolts, and then hook the band to secure
the owner's tool kit.
4. Install the seat. (See page 4-12.)
[ECB01110]
2
EBU25243
Replacing the fuse
1. Fuse
2. Spare fuse
The fuse holder is located under the seat. (See
page 4-12.)
If the fuse is blown, replace it as follows.
1. Turn the key to "OFF" and turn off all electrical
circuits.
ECB00640
NOTICE
To prevent accidental short-circuiting, turn off
the main switch when checking or replacing a
fuse.
8-40
8