Removing And Installing Parts - Dell XPS 600 Service Manual

Back to Contents Page

Removing and Installing Parts

Dell™ XPS™ 600 Service Manual
Memory
Cards
Drives
Hard Drive
Floppy Drive
Media Card Reader (Optional)
CD/DVD Drive
Processor Airflow Shroud
Memory
You can increase your computer memory by installing memory modules on the system board.
Your computer supports DDR2 memory. For additional information on the type of memory supported by your computer, see
the technical specifications for memory.
DDR2 Memory Overview
DDR2 memory modules should be installed in pairs of matched memory size and speed. If the DDR2 memory modules
are not installed in matched pairs, the computer will continue to operate, but with a slight reduction in performance.
See the label in the upper-right corner of the module to determine the module's capacity.
NOTE: The module's capacity label can also be seen in the upper-left corner of the module.
NOTE: Always install DDR2 memory modules in the order indicated on the system board.
The recommended memory configurations are:
A pair of matched memory modules installed in DIMM connectors 1 and 2
or
A pair of matched memory modules installed in DIMM connectors 1 and 2 and another matched pair installed in
DIMM connectors 3 and 4
NOTICE: Do not install ECC memory modules.
Processor
System Board
Power Supply
Front Panel
Front LED Board
Drive Door
Battery