Targus ACB20 User Manual page 6

USB Bluetooth ® 2.1 Adapter
Verifying the Adapter is Installed
After installing the adapter software (for 2000/XP):
1 Click Start/Settings/Control Panel/System/Hardware/ Device
Manager.
2 Check under 'Bluetooth Devices' that a 'Broadcom 2046 Bluetooth 2.1
USB-UHE device / USB device" is installed.
After installing the adapter software (for Vista / 7):
1 Click Start/Control Panel/Hardware/Device Manager.
2 Check under 'Bluetooth Radios' that a 'Broadcom Bluetooth USB with
AMP" is installed.
If the information is not present:
1 Unplug the adapter
2 Plug the adapter into the USB port to initiate the driver. Verify that the
adapter is installed.
You are now ready to configure the Bluetooth.
10
USB Bluetooth ® 2.1 Adapter
Configuring Bluetooth Devices
Bluetooth Tray
The Bluetooth tray resides in the Windows system tray, which is
normally located in the lower-right corner of the screen. The Bluetooth tray
provides fast access to most Bluetooth operations.
From the Bluetooth tray you can (Windows 2000/XP):
• Access My Bluetooth Places: double-click the Bluetooth icon, or right-click
the Bluetooth icon and then select Explore My Bluetooth Places.
• Add a Bluetooth device: right-click the Bluetooth icon and then select Add
a Bluetooth device.
• Access the Bluetooth Configuration Panel: right-click the Bluetooth icon,
and then select Bluetooth Configuration.
• Access the Quick Connect option: right-click the Bluetooth icon, select
Quick Connect, and then select the type of service to which you wish to
connect.
• Start/Stop Bluetooth on this computer.
From the Bluetooth tray you can (Windows Vista / 7):
• Add a Bluetooth device: right-click the Bluetooth icon and then select Add
a device.
• Show a Bluetooth device: right-click the Bluetooth icon and then
select Show Bluetooth device.
• Access the Bluetooth Configuration Panel: right-click the Bluetooth icon,
and then select Open Setting.
11