Table of Contents
Advertisement
Back to Contents Page
Display
Dell™ Inspiron™ 5160 Systems Service Manual
Display Assembly
Display Bezel
Display Panel
Display Latch Assembly
Display Assembly
CAUTION:
Before performing the following procedures, read the safety instructions in your Product Information Guide.
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your
computer's electronic components. You can do so by touching an unpainted metal surface.
1. Follow the instructions in
"Preparing to Work Inside the
2. Remove the
hard
drive.
3. Remove the
optical
drive.
4. Remove the
hinge
cover.
5. Remove the keyboard.
6. Close the display.
7. From the back of the computer, remove the two M2.5 x 5-mm screws.
.
8. Open the display assembly approximately 180 degrees, and support the display assembly so that it does not open past this position.
9. Remove the two M2.5 x 5-mm screws from each hinge bracket.
1 M2.5 x 5-mm screws (4)
2 display assembly
3 hinge brackets (2)
Computer."
Advertisement
Table of Contents
