Counting Mode - Baijia BJ-05 Operation Manual

5.4 Counting Mode

During the counting, when detect out a suspect banknote (half chain and double banknote) or
abnormal stop, the machine will stop counting and send out warning, the relative error message
,
,
will be shown on the batch number display (as H showing)
The last one that on the stacker is suspect which won't be counted in the numbers that shown on the
counting number display
5.4.1 Counting Mode
This function is used automatically under closing all of the detection function buttons.
Put the banknotes in the hopper, the unit will auto start and count a ll o f o nes a nds how th e co unting
number in the display.
To continue counting, take out all of the banknotes from the s tacker a nd p ut n ext w ad o f b anknotes
in the hopper. The unit will be shown"
If all of banknotes in the stacker aren't taken out and put more banknotes in the hopper, the unit
will restart automatically and add the new numbers to the former ones.
When meeting a suspect banknote(half, chain a nd d ouble b anknote),t he u nit w ill st op co unting an d
send out warning, the relative code
(as H showing). At this time you must take out all of the banknotes from the stacker and put t hem i n
the hopper again, the unit can go on counting from"
otherwise it will stop counting.
Feeding Self-
Operation
Operation checking
" in the counting number display and count again.
, , will be flashed and shown on the b atch n umber d isplay
Detection
Button Counting
Sensitivity
Function Mode
Adjustment
" again until you press the
13
Outer
Display
button,
CLEAR CLEAR RESTART RESTART