Table of Contents
Advertisement
Introduction
The DM17TS is a 17-inch, Flat Screen thin-film transistor (TFT) LCD color monitor. Capable of
resolutions up to 1280 x 1024, this advanced monitor produces crisp, clear pictures and brilliant
colors.
The monitor provides installation flexibility with 2 BNC Video In/Out connectors, S-Video In/Out as
well as VGA In from a PC.
Other advanced features include 2 Audio Input/Output channels, Built-in speaker, and IR Remote
Control.
Features
•
17" Color LCD Monitor
•
3 NTSC Video channels – 2 BNC inputs, 1 S-Video input
•
On-Screen-Display Controls.
•
Resolution: 1280 x 1024
•
450 TV Lines
•
Low Power Consumption.
•
Built-In Interface for Wall or Arm Mounting VESA 75mm FPMPMI Compliant.
•
PIP
•
Full digital image processing.
•
Tough and durable design for professional use.
•
Space saving attractive design
Installation
1. The monitor comes with both a desk mount stand and rack mount ears. If using the desk mount,
secure the mount to the bottom of the monitor using the screws provided. If rack mounting, secure
the rack mount ears to each side of the monitor using the included screws.
2. Make the appropriate video connections. As shown in the Figure 1.0 below, the available
connections are:
I. BNC Inputs – Connect the first video signal to CH 1 Video In. If using a second video
signal, connect to CH2 Video In.
Note that each of these inputs has a corresponding Video Out BNC connector is looping
operation is desired.
II. S-Video – Connect this video cable to the input labeled S-Video, Video In. A video
output is also provided.
III. VGA Input – Connect the cable from a PC video card to the input labeled VGA In.
3. If using audio, connect the RCA audio cable to the desired channel. Each channel also provides
an RCA Audio Out connector. (See Figure 1.0)
4. Plug the power cord into a nearby power outlet. Note that there is also a main power toggle switch
on the side of the monitor.
6
Advertisement
Table of Contents
