Function Table And Default Factory Settings - Brother DCP-560CN Network User's Manual

Function table and default factory settings

Level1 Level2
LAN TCP/IP
Setup Misc.
Factory
Reset
The factory settings are shown in bold.
1
On connection to the network, the machine will automatically set the IP address and Subnet Mask to value appropriate for your network.
2
For DCP560CN, the default Node Name is BRN_xxxxxx (where xxxxxx is the last six digits of the Ethernet address).
Level3 Options
BOOT Method Auto/Static/RARP/BOOTP/DHCP
IP Address
[000-255].[000-255].[000-255].[000-255] *
Subnet Mask
[000-255].[000-255].[000-255].[000-255]*
Gateway [000-255].[000-255].[000-255].[000-255]
Node Name
BRNxxxxxxxxxxxxx= (your machine's Ethernet address)
(up to 15 characters)
WINS Config Auto/Static
(Primary)
WINS Server
[000-255].[000-255].[000-255].[000-255]
(Secondary)
[000-255].[000-255].[000-255].[000-255]
(Primary)
DNS Server
[000-255].[000-255].[000-255].[000-255]
(Secondary)
[000-255].[000-255].[000-255].[000-255]
APIPA On/Off
Ethernet Auto/100B-FD/100B-HD/10B-FD/10B-HD
Appendix B
B
1
1
2
B
50