Brother PT-9600 User Manual page 94

TROUBLESHOOTING
(8) The tape is not ejected correctly after
being automatically cut.
(9) The cutter does not cut correctly.
80
Problem
Cotton swab
Metal piece
(Area to be cleaned)
Solution
● Turn off the machine, open the tape com-
partment cover, and remove the tape cas-
sette if one is installed.
● Using a cotton swab, clean off the metal
piece in the exit slot to the left of cutter.
● Change the HALF CUTTER setting. (Refer
to page 70.)
● The cutter may be dull. Contact your ser-
vice representative.