Panasonic AJ-PX230 User Manual page 9

For AJ-PX230 camera, the adjustment of Detail is usually made by setting MASTER DETAIL (intensity of the effect)
and DETAIL CORING. DETAIL CORING is a function to set the level of signal (including noise) which suppresses
the Detail effect.
For further information, please refer to "2-4. More advanced settings for Detail".
On the other hand, as an advanced setting, DETAIL (both horizontal and vertical directions) and V DETAIL (vertical
direction) are mainly used. Within a certain range of levels of outline signal, the adjustment can be made balancing
the horizontal and vertical effects against each other.
If the setting value is set to a positive value, which is greater than the center value "0" (zero), that is, if the Detail level is
increased, the edges of video signal will be intensified horizontally and vertically and the picture will look sharper with
an enhanced outline of an object. To the contrary, if it is set to a negative value, that is, if the Detail level is decreased,
the outline enhancement will be suppressed and the picture will look softer.
After the Detail is adjusted, if there is a noticeable difference in sense of resolution between the horizontal and vertical
directions, use V DETAIL to make adjustments to the vertical Detail only.
VDTL
(Vertical Direction)
In this picture, the
adjustment in the
positive direction can
make the eyes look
clearer.
(Horizontal Direction)
In this picture, the
adjustment in the
positive direction can
make the outline of the
neck look sharper.
9
HDTL