Recording Setup Menu - Panasonic AJ-PX230 User Manual

RECORDING SETUP menu

Menu item
FILE SPLIT
RECORDING
RECORDING
HOLD
ONE SHOT
TIME
RECORDING
SETTING
INTERVAL
TIME
START
DELAY
PRE REC
ONE CLIP REC
SIMUL REC
BACKGROUND REC
START TEXT MEMO
TIME STAMP
DF MODE
TCG
Description
Set record file format
Set record modes
Retain setting of RECORDING item
after power OFF and ON
Set record duration of ONE SHOT
record mode
Set record interval time (pause time) of
Time-laps recording.
In INTERVAL and ONE SHOT modes.
Delay the record start time for 1 second
Turn ON/OFF the pre-record mod. This
mode allows the camera to start
recording the video and audio (approx.
3 sec in the HD mode, 7 sec in the SD
mode) before rec button is pressed.
Turn ON/OFF a record mode that
allows multiple clips as a single
successive clip.
Turn ON/OFF the record mode that
allows simultaneous
recordings with 2 microP2 cards.
(See P.43)
Turn ON/OFF the record mode that
allows simultaneous recordings.
(See P.43)
Leave text memo when record starts
Allow recording of superimposed date
and time on the image.
Set timecode drop frame mode
Set timecode count mode
42
Setting (factory default)
ONE FILE: each clip data is recorded as a
single file without splitting (LongG codecs
only)
SPLIT: each clip data splitted at every 4GB
SHORT SPLIT：each clip data is splitted at
every 128 seconds
NORMAL: normal mode
INTERVAL: time-lapse mode
ONE SHOT: record specified duration and
stop
LOOP: endless record mode using 2 P2
cards
ON: retain record mode setting
OFF: Back to normal mode after power ON
1frm / 2frm / 4frm / 8frm / 16frm / 1s
2frm / 4frm / 8frm / 16frm / 1s / 2s / 5s / 10s
/ 30s / 1min / 5min / 10min
redundant
FREE RUN / REC RUN
ON / OFF
ON / OFF
ON / OFF
ON / OFF
ON / OFF
ON / OFF
ON / OFF
DF / NDF