Ec Declaration Of Conformity - Husqvarna 525RX Operator's Manual

Approved accessories
Centre hole in blades/cutters, Ø 25,4
mm
Blade shaft thread M10
Grass blade/grass cutter
Saw blade
Plastic blades
Trimmer head
Support cup

EC Declaration of Conformity

(Applies to Europe only)
We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare that the brush cutters Husqvarna
525RX, 525RXT, 525RK with serial numbers dating from 2016 onwards (the year is clearly stated on the rating plate,
followed by the serial number), comply with the requirements of the COUNCIL'S DIRECTIVE:
- of May 17, 2006 "relating to machinery" 2006/42/EC.
- of February 26, 2014 "relating to electromagnetic compatibility" 2014/30/EU.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC. Conformity assessment according
to Annex V. For information relating to noise emissions, see the Technical data chapter.
The following standards have been applied:
EN ISO 12100:2010, EN ISO 11806-1:2011, ISO 14982:1998, CISPR 12:2007
SMP Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has performed voluntary type examination
on behalf of Husqvarna AB. The certificates are numbered: SEC/13/2383 - 525RX, 525RXT, 525RK
Huskvarna March 30, 2016
Per Gustafsson, Development manager (Authorized representative for Husqvarna AB and responsible for technical
documentation.)
30 – English
TECHNICAL DATA
Type
Grass 255-4 1" (Ø 255 4-teeth)
Grass blade 255-3 (Ø 255 3 teeth)
Scarlet 200-22 1" (Ø 200 22 teeth)
Tricut Ø 300 mm (Separate blades
have part number 531 01 77-15)
T25 (Ø 2.0 - 2.7 mm cord)
T35, T35x (Ø 2.4 - 3.0 mm cord)
Superauto II
Alloy (up to Ø 2,4 mm cord)
Fixed
Cutting attachment guard, Art. no.
503 93 42-02
503 93 42-02
537 29 95-01
503 93 42-02
503 93 42-02 / 503 97 71-01
503 93 42-02 / 503 97 71-01
503 93 42-02 / 503 97 71-01
503 93 42-02 / 503 97 71-01
-