Assembly Instructions - Kärcher K 3.740 Operator's Manual

For more detailed information on

how to assemble this high pressure
washer, please visit
www.karcherresidential.com/assembly
Required tools
A Philips Screw-
driver, medium
size (not supplied)
for final assembly
Assembly
Mount loose parts delivered with appli-
ance prior to start-up.
Install wheels and hub caps
STEP 1:

Remove the covers from the wheels.
STEP 2:

Insert the wheel into the body, rotat-
ing the wheel as you push it into
place. You should hear a click when
the wheel is completely inserted.
Then push the wheel cap into place
on the wheel, press around edges
and the center of the wheel cap to
make sure it is properly seated. You
should hear another click. Do not
proceed with the assembly until the
wheels are securely installed.
6 English

ASSEMBLY INSTRUCTIONS

Install the storage for trigger gun
STEP 3:

Place the bottom holder into the re-
cesses and push forward until it audi-
bly locks in.
Insert the top holder and push down
all the way.
Install the storage hook for the power
cord
STEP 4:

Press in the storage hook and lock it
into the top position.
Install the transport handle
STEP 5:

Place the transport handle into the
intake until you feel resistance. Use
the heel of your hand or a soft rubber
mallet to position it.