Specifications - Orion HP-2800 Owner's Manual

SPECIFICATIONS

Amplifier Section
Power Output 4W
(Watts) 1
Power Output 2W
(Watts) 2
Power Output 4W
(Watts) Bridged
Amplifier
Efficiency
Remote Bass
Function
Distortion at
Rated Power
Frequency
Response
Linear Bandwidth
Damping Factor
Input Sensitivity
Supply Voltage
Range
Protection
Terminal Wire
Gauge
Input Impedance
Fuse Type
Dimensions
Weight
High Pass
Crossover
Low Pass
Crossover
Intelli-Q
Intelli-Bass
1. Continuous 4W load 20Hz to 20kHz, < 1% THD, with input voltage at 14.4VDC.
2. Continuous 2W load 20Hz to 20kHz, < 1% THD, with input voltage at 14.4VDC.
8
HP-2800
125 x 2 65 x 4
200 x 2 100 x 4
400 x 1 200 x 2
> 50% into 2W load > 50% into 2W load
at max. power at max. power
yes (HP-RB1 yes (HP-RB1
optional) optional)
< 1.0% THD+N < 1.0% THD+N
20Hz to 20kHz 20Hz to 20kHz
±0.25dB ±0.25dB
10Hz to 100kHz 10Hz to 100kHz
±3dB ±3dB
> 200 > 200
150mV to 5V rms 250mV to 5V rms
9 to 16V 9 to 16V
thermal, DC offset, thermal, DC offset,
reverse polarity, reverse polarity,
short protection, short protection,
under-voltage, under-voltage,
over-voltage over-voltage
Power 4 AWG, Power 4 AWG,
Remote 12 AWG, Remote 12 AWG,
Ground 4 AWG, Ground 4 AWG,
Speaker 12 AWG Speaker 12 AWG
20kW 20kW
(2) 30 Amp (2) 30 Amp
13.5"x10.25 x 2.4" 13.5"x10.25 x 2.4"
8.4 lbs. 9 lbs.
Crossover Section
Continuously Continuously
variable (50-500Hz) variable (50-500Hz)
Continuously Continuously
variable (50-500Hz) variable (50-500Hz)
yes yes (channels 3/4)
n/a yes (channels 1/2)
© 2005 Directed Electronics, all rights reserved
HP-4800