Canon imageFORMULA DR-3060 Startup Manual page 55

Amount of paper that can be
stacked in automatic feeder
Interface
Other functions
Dimensions (with trays closed)
Dimensions (with trays open)
Weight
power supply
Power consumption
Noise
Operating environment
The functions described above can be used if they are supported by the application
software.
Some functions may not be available, depending on the performance of your PC and
depending on your software.
Due to our ongoing efforts to improve our products, the specifications described above are
subject to change without notice.
Options
Endorser ED500
Consumables
Exchange Roller Kit
10 mm stack, maximum
SCSI-II
Automatic document thickness adjustment
7.5 x 13.5 x 10.9 in. (H x W x D)
191 x 344 x 278 mm (H x W x D)
9.6 x 13.5 x 21.9 in. (H x W x D)
244 x 344 x 555 mm (H x W x D)
Approximately 8.1 kg
100V to 120V AC (50/60Hz)
200V to 240V AC (50/60Hz)
Scanning:
Standby:
Low-power mode: Approx. 10W
Not more than 70dB
Temperature: 10 degree C to 32.5 degree C
Humidity: 20% to 80% RH
This device prints a six-digit number and a letter on
the back side of a document that has been scanned.
This is a transport roller replacement kit. Service
personnel must actually perform the replacement.
Contact your service personnel.
42W maximum
Under 20W
Specifications
51