Pioneer DEH-P8100R Installation Manual page 5

Front output
Subwoofer output
or Non-Fading output
Blue/white
To system control terminal
of the power amp (max. 300mA 12V DC).
The pin position of the
ISO connector will differ
depends on the type of
vehicle. Connect 6*
and 7* when Pin 5 is an
antenna control type.
In another type of
vehicle, never connect
6* and 7*.
Blue/white (6*)
Blue/white (7*)
To Auto-antenna reray control
terminal (max. 300mA 12V DC).
Speaker leads
White
: Front left +
White/black : Front left ≠
Gray : Front right +
Gray/black : Front right ≠
Green : Rear left + or Not used
Green/black
: Rear left ≠ or Not used
V iolet : Rear right + or Subwoofer +
V iolet/black : Rear right ≠ or Subwoofer ≠
Connecting cords
with RCA pin plugs
(sold separately)
System remote control
Front speaker
+
≠
Subwoofer
+
≠
Perform these connections when using a
different amp (sold separately).
Note:
When a subwoofer is connected to this unit instead
of a rear right speaker, do not connect the rear left
speaker lead to anything. For details, refer to the
Initial Setting Menu in the Operation Manual.
Power amp
(sold separately)
Power amp
(sold separately)
Front speaker
+
≠
Subwoofer
+
≠
Fig. 2
4