Yamaha YFM700RA Owner's Manual page 44

Compression damping force (for slow compres-
sion damping)
To increase the compression damping force and
thereby harden the compression damping, turn the
compression damping force adjusting screw in di-
rection (a). To decrease the compression damping
force and thereby soften the compression damp-
ing, turn the adjusting screw in direction (b).
4
1. Compression damping force adjusting screw (for slow
compression damping)
1
(a)
1
(b)
Compression damping setting (for slow com-
pression damping):
Minimum (soft):
16 click(s) in direction (b)*
Standard:
10 click(s) in direction (b)*
Maximum (hard):
1 click(s) in direction (b)*
* With the adjusting screw fully turned in di-
rection (a)
EWB00410
WARNING
These shock absorber assemblies contain
highly pressurized nitrogen gas. Read and un-
derstand the following information before han-
dling the shock absorber assemblies.
G Do not tamper with or attempt to open the
cylinder assemblies.
G
Do not subject the shock absorber assem-
blies to an open flame or other high heat
source. This may cause the unit to explode
due to excessive gas pressure.
G
Do not deform or damage the cylinders in
any way. Cylinder damage will result in poor
damping performance.
4-18