Yamaha GRIZZLY 125 YFM125GY Owner's Manual page 82

Tightening torque:
Screw:
1
16 Nm (1.6 m·kgf, 11.6 ft·lbf)
Oil filler bolt:
2
23 Nm (2.3 m·kgf, 16.6 ft·lbf)
3
To change the transmission oil
1. Place the ATV on a level surface.
4
2. Start the engine, warm it up for several min-
5 utes, and then turn it off.
3. Place an oil pan under the transmission to col-
6
lect the used oil.
4. Remove the oil filler bolt and the drain bolt to
7
drain the oil from the transmission case.
8
9
10
1
11
1. Transmission oil drain bolt
5. Install the drain bolt, and then tighten it to the
specified torque.
Tightening torque:
Transmission oil drain bolt:
23 Nm (2.3 m·kgf, 16.6 ft·lbf)
6. Refill with the specified amount of the recom-
mended transmission oil, and then install and
tighten the oil filler bolt.
Recommended transmission oil:
See page 10-1.
Oil quantity:
0.6 L (0.63 US qt, 0.53 Imp.qt)
Tightening torque:
Oil filler bolt:
23 Nm (2.3 m·kgf, 16.6 ft·lbf)
ECB00790
NOTICE
G
Make sure that no foreign material enters the
transmission case.
G
Make sure that no oil gets on the tires or
wheels.
7. Start the engine, and then let it idle for several
8-14